NetVanta Documentation

NV1335PWR Features

 

 

 

 

 

The NetVanta 1335 PWR has the following features:

  • 24-port managed Layer 2 Fast Ethernet switches with integral IP router, firewall, and VPN
  • Feature-rich ADTRAN Operating System (AOS)
  • Recognizable Command Line Interface (CLI) and user-friendly, web-based Graphical User Interface (GUI)
  • Telnet, HTTP, SSL, SSH, craft/console port, or SNMP management options
  • XAUTH including RADIUS and RSA SecurID
  • Flash memory supports dual images of AOS
  • Expandable memory via CompactFlash® and SODIMM slots
  • TFTP, FTP, and XMODEM for firmware upgrades and maintenance updates
  • LLDP (802.1AB) for discovering neighboring peers
  • Dual combination 10/100/1000BaseT Ethernet port/SFP module slots for high-speed uplink or stacking requirements
  • Stacking (up to 16 switches) with single IP address management
  • Compatible with ADTRAN’s other VPN-equipped NetVanta products
  • Auto-rate, auto-duplexing, and auto-MDI/MDI-X sensing
  • Support for VLAN trunking and GVRP with up to 255 active VLANs (802.1Q)
  • Class of Service (CoS) (802.1p) and DiffServ for traffic prioritization with weighted round robin (WRR) and strict priority queuing
  • Four queues per egress port
  • DiffServ-to-802.1p mapping
  • Spanning Tree/Rapid Spanning Tree support (802.1D/802.1w)
  • Storm control, link aggregation (802.3ad), and port mirroring
  • MAC-based port security
  • Full-featured onboard IP access router supports all NetVanta 3000 Series routing features
  • Interchangeable Network Interface Modules (NIMs) with integral DSU/CSU
  • 56k/64k DDS, T1/FT1, T1/FT1 + DSX-1, Dual T1/FT1, E1/FE1, E1/FE1 + G.703, ADSL (Annex A or Annex B), SHDSL, and serial NIMs available
  • Dial backup to any PPP-compliant device
  • Analog modem, ISDN BRI (U or S/T), or serial Dial Backup Interface Modules (DIMs) available
  • Standards-based BGP, OSPF, RIP, and static routing support
  • Bridging across the WAN
  • Ideal for Frame Relay, Multilink Frame Relay, PPP, Multilink PPP, PPPoE, or ATM (ADSL NIM) networks
  • Integral stateful inspection firewall protects against Denial of Service (DoS) attacks
  • Quality of Service (QoS) with low latency queuing (LLQ) and weighted fair queuing (WFQ), and DiffServ marking
  • Frame Relay and PPP fragmentation to avoid latency
  • VLAN (802.1Q) trunking/interVLAN routing and bridging
  • Network Address Translation (NAT/NAPT) and NAT Traversal version 2
  • NAT-compatible SIP ALG
  • DHCP client, server, and relay
  • IPSec VPN upgrade supporting 500 tunnels and DES/3DES/AES encryption
  • Single combination 10/100/1000BaseT Ethernet port/SFP module slot for high-speed uplink or stacking requirements
  • 6.8 Gbps non-blocking switching capacity
  • 1U, 19-inch rackmount metal enclosure
  • 1.7-inch H x 17.2-inch W x 7.8-inch D
  • Auto-ranging power (100 to 250 VAC, 50/60 Hz)

 

©2007 Adtran Inc.