Total Access 900 Features

 

 

 

 

 

Total Access 904/908

 

 

 

 

 

Total Access 912/916/924

 

The Total Access 900 Series has the following features:

• Voice over IP, SIP-based Multi-Service Access Gateway
• One DS1 interface and one DSX-1 interface
• One auto-MDI/MDX 10/100BaseT port (RJ-48C)
• Models available in 4, 8, 12, 16, and 24 analog voice (FXS) configurations
• Optional model supports 16 FXS and 8 FXO analog ports with octal FXO daughter board
• Includes the full-featured ADTRAN Operating System (AOS) IP router/firewall
• QoS/NAT/DHCP client, server, and relay
• Supports SIP trunks
• Up to 1.536 Mbps of Frame Relay or PPP
• HDLC encapsulation
• Caller ID, message waiting, and stutter dial tone
• Fax and analog modem compatible (V.90)
• Supports local station-to-station calls
• Up to 24 channels of G.711 (µ-law)
• Up to 24 channels on G.729
• Up to 24 channels of DTMF detection/generation
• 16 ms echo cancellation
• Up to 24 channels of caller ID
• Supports configurable adaptive and static jitter butters
    Dynamic jitter buffer:
       Nominal (10 ms steps from 10 ms to 240 ms)
       Maximum (10 ms steps from 40 ms to 320 ms)
    Static jitter buffer:
       Nominal (10 ms steps from 10 ms to 240 ms)
• Supports Primary Rate ISDN (PRI) or Robbed Bit Signaling (RBS) on the DSX-1 interface
• Recognizable Command Line Interface (CLI) and user-friendly, Web-based Graphical User Interface (GUI)
• LEDs for system status information
• Total Access 904/908: 1.75-inch H x 12.0-inch W x 7.5-inch D
• Total Access 912/916/924: 1.75-inch H x 17.0-inch W x 8.5-inch D
• AC Power: 90 to 120 VAC, 60 Hz