See Add/Edit 802.16 Protocol Configuration Profile below for details of list items.
See Action Buttons
Different configurations are displayed for HiperMAX / HiperMAX-micro / MacroMAX and MicroMAX
Name: Length 2 to 64 characters. Allowed characters 0 to 9, A to Z, a to z, ., #, -, _
DCD Interval (ms) : Time between transmission of DCD Messages: Default = Not Specified. Allowed Range = 0 to 10000ms.
DCD Transition MAC frames: The time the BS TRx shall wait after repeating a DCD message with an incremented configuration change count before issuing a DL-MAP message referring to uplink burst profiles defined in that DCD message. Allowed Range = 2 to 65535 MAC frames
UCD Interval (ms): Time between transmission of UCD Messages: Allowed Range = 0 to 10000ms.
UCD Transition MAC frames: The time the BS TRx shall wait after repeating a UCD message with an incremented configuration change count before issuing a DL-MAP message referring to downlink burst profiles defined in that UCD message. Allowed Range = 2 to 65535 MAC frames
Max MAP Pending: Maximum Validity of MAP.
DSx Request Retries: Number of timeout retries on DSA/DSC/DSD requests. Default =3
DSx Response Retries: Number of timeout retries on DSA/DSC/DSD responses. Default =3
UL-MAP Effectiveness Time (Tproc) (us): Time provided between the last bit of a UL-MAP at an SS and effectiveness of that MAP in us.
T5: Uplink Channel Change Response (ms): Wait for uplink channel change response. Allowed Range=0 to 2000ms.
T7: DSx Response Timeout (ms): Wait for DSA/DSC/DSD response timeout. Allowed Range=0 to 1000ms.
T8: DSA/DSC ACK Timeout (ms): Wait for DSA/DSC acknowledge timeout. Allowed Range=0 to 300ms.
T9: Registration Timeout (ms): The time allowed between the BS TRx sending a RNG-RSP (success) to an SS and receiving a SBC-REQ from the same SS. Default =30000ms. Allowed Range=300 to 65535ms.
T10: Wait for Transaction End (ms): Wait for transaction end timeout. Default = Not Specified. Allowed Range=0 to 3000ms.
T13: TFTP Completion Timeout min: The time allowed for an SS, following receipt of a REG-RSP message to send a TFTP-CPLT message to the BS TRx in min. Default = 15min. Allowed Range = 15 to 65535 min.
T15: Wait for MCA-RSP (ms):Wait for MCA-RSP in ms. Default = 20ms. Allowed Range = 20 to 65535 ms.
T17: Authorisation and Key Exchange min: Time allowed for SS to complete SS Authorization and Key Exchange in minutes. Default = 5min. Allowed Range = 5 to 65535 min.
T22: Wait for ARQ Reset (ms):Wait for ARQ Reset (ms). Default = Not Specified. Allowed Range = 0 to 500 ms.
T27: Idle: Max Time Between Unicast Grants (ms): Maximum time between unicast grants to SS when BS TRx believes SS uplink transmission quality is good enough. Default =5000ms. Allowed Range = 10 to 2147483647 ms.
T27: Active: Max Time Between Unicast Grants (ms): Maximum time between unicast grants to SS when BS TRx believes SS uplink transmission quality is not good enough. Default =5000ms. Allowed Range = 10 to 2147483647 ms.
Initial Ranging Interval (ms): Time between initial ranging regions assigned by the BS TRx. Default = 5. Allowed Range = 0 to 2000 ms.
Ranging Resp. Proc. Time (us): Time allowed following the receipt of a ranging response before it is expected to reply to an invited ranging request. Default = 30000. Allowed Range = 10000 to 2147483647 us.
Invited Ranging Retries: Number of retries on inviting ranging requests. Default = 16. Allowed Range = 16 to 65535.
2nd Mgmt Connection Dnlk Service Class: Select required service class. The second management channel automatically has priority '8', regardless of what has been set in the service class It's a good idea to set a reasonable MIR though.
2nd Mgmt Connection Uplk Service Class: Select required service class
BS TRx SFID Auto Allocation: Enable / Disable
Name: Length 2 to 64 characters. Allowed characters 0 to 9, A to Z, a to z, ., #, -, _
DCD Interval (ms) : Time between transmission of DCD Messages: Default = Not Specified. Allowed Range = 0 to 10000ms.
DCD Transition MAC frames: The time the BS TRx shall wait after repeating a DCD message with an incremented configuration change count before issuing a DL-MAP message referring to uplink burst profiles defined in that DCD message. Allowed Range = 2 to 65535 MAC frames
UCD Interval (ms): Time between transmission of UCD Messages: Allowed Range = 0 to 10000ms.
UCD Transition MAC frames: The time the BS TRx shall wait after repeating a UCD message with an incremented configuration change count before issuing a DL-MAP message referring to downlink burst profiles defined in that UCD message. Allowed Range = 2 to 65535 MAC frames
UL-MAP Effectiveness Time (Tproc) (us): Time provided between the last bit of a UL-MAP at an SS and effectiveness of that MAP in us.
T9: Registration Timeout (ms): The time allowed between the BS TRx sending a RNG-RSP (success) to an SS and receiving a SBC-REQ from the same SS. Default =30000ms. Allowed Range=300 to 65535ms.
T27: Active: Max Time Between Unicast Grants (ms): Maximum time between unicast grants to SS when BS TRx believes SS uplink transmission quality is not good enough. Default =5000ms. Allowed Range = 10 to 2147483647 ms.
Initial Ranging Interval (ms): Time between initial ranging regions assigned by the BS TRx. Default = 5. Allowed Range = 0 to 2000 ms.
See Action Buttons