This procedure should be used in conjunction with the Schroff 14 Slot ATCA Manual 11596-006
The 13U shelf can be fitted in a standard ATCA Rack or into a standard 19" Rack using adapters.
Place Shelf supports at the height of the base of the ATCA Shelf into the sides of the ATCA rack. Fixing the supports will be dependant on ATCA Rack used.
Slide the shelf into position and secure into the front of the rack with eight retaining M6 screws and nylon washers.
The grounding for the shelf is via two M6 studs in the lower right hand corner of the shelf. A lug for 6mm green/yellow cable is provided with the shelf. The lug should be crimped with the Panduit CT-720 installation tool with a CD720-1-blue P24 die or Thomas & Betts part no.54205UF.