|
Tool |
|
Large Crosshead Screw driver Phillips # 3 or Pozidrive # 3 |
|
Small flat blade Screwdriver |
|
13mm or 1/2" open ended Spanner" |
|
10mm or 13/32" open ended Spanner |
|
Wire strippers |
|
Wire cutters |
|
Ring terminals crimp tool |
In order to install an SCRT the following parts may be required (see earlier sections for regarding structure of installation kits).
|
Installation Parts |
SCRT Installation Kit Mount per SCRT consisting of: |
Notes |
|
SCRT Basestation RF |
1x SCRT Unit |
|
|
1 x Antenna with Mounting Brackets |
If remote antenna is used feeder is required see details below | |
|
1x Rear Sunshield |
| |
|
1 Front Sunshield |
Remote Antenna only Not required when SCRT mounted antenna is used | |
|
SCRT Installation Kit |
See below for details | |
|
Connecting Cables |
See below for details | |
|
Surge Protector |
See below for details | |
|
Other installation parts |
Not provided by Airspan. See below for details |
This kit is shown in the picture below:
The content of the kit as shown below
|
SCRT Installation Kit - Pole Mounting (1) |
|
|
Reference |
|
|
1 |
Packing |
|
2/3 |
1* Bracket (2Part) |
|
4 |
2* U-Bolts with Nuts and Washers |
|
5 |
1* M8x85mm Bolt: 1* M8 Nut: 1* M8 washer (for bracket) |
|
6 |
8* M5 Flat Washers: 8* M5 Spring Washers: 8* M5X16mm Screws (see note) |
|
7 |
4* M6 Flat Washers: 4* M6 Spring Washers: 4* M6X16mm Screws (for bracket) |
|
8 |
4* M3 Flat Washers: 4* M3 Spring Washers: 4* M3X8mm Screws (for sunshield) (see note) |
|
Note : |
Item 8 is surplus when antenna is fitted to SCRT |
|
4 of item 6 are surplus when remote antenna is used | |
|
Installation Kit /Part |
SCRT Installation Kit Bracket Mount per SCRT consisting of: |
Note |
|
Connecting Cables |
1x Fibre |
Available in 3, 10, 30 and 100 Metre lengths |
|
1x Power |
Power cables for HiperMAX-micro are connectorised at both ends and are available in 3, 10, 30 and 100 metre lengths. Power cables for HiperMAX are connectorised at the SCRT end only and are available in 30 and 100 metre lengths. |
|
Installation Kit /Part |
Note |
|
Surge Protection
|
LPK-SCRT-PWR-1: SCRT Power Lightning Protection Kit - consisting of 1x 48V surge arrestor |
|
Installation Kit /Part |
Note |
|
Antenna/Feeder Note: These are not always provided by Airspan |
Antenna. See Airspan Antenna and Feeder guide |
|
Short Feeder 1-2Metres |
|
Additional Items (not provided by Airspan) |
|
Cable ties |
|
Self Amalgamating Tape (15cms x 20mm recommended) |
|
Mounting Pole |