The SCRT can be mounted to a plate by screwing into the back through the metal plate. The SCRT should be mounted so that the power and optic connectors are facing down.
A plate should be provided for fixing the SCRT to the approximate dimensions below and drilled as shown
Note that the plate must be earthed. To prevent corrosion it is recommended that the plate is made of galvanised steel.
Place the SCRT on a flat surface with the RF connector facing up
Fix the sun shield (front) to the SCRT using the four M5 screws provided
Fix the SCRT to the plate using the fixing holes as indicated below
Note: This
method is only suitable when using an external antenna. For
systems where the antenna is attached to the SCRT (i.e.3.5GHz versions)
the antenna should be pole mounted to allow for antenna panning to the
base station.