This is a document to describe procedure to install stopcopy
authorization. Stopcopy Authorization is only required when user wants to run
the FLASHZap client outside the Motorola Intranet.
The General knowledge of Window OS.
FlashZap client: It is a tool used for performing several
diagnostics functions on several platforms of radios. The Flashzap client is
also capable of flashing radios.
Stopcopy – software used for copy protection.
Authorization – Software authorization to give permission.
AuthmanW – Application supplied with FLASHZap client that enable
use to activate stopcopy authorization
StopcopyInfoTool – Tool supplied with FLASHZap client that
provides information, which is needed to while using AuthmanW.
See reference [2].
Michelle Fiske
Email: [email protected]
Phone: (954) 723 5262
1.
Every time user install newer version of FLASHZap client, user doesn’t
need to activate the FLASHZap client using this procedure, because uninstalling
the FLASHZap client doesn’t remove stopcopy authorization.
1.6
Process highlight
[1]
Software Standard Process, FL08-STD-94A033, Version 03.00
[2]
Acronyms, Abbreviations and Definitions, FL08-STD-96A196, Version 01.02
[3]
Document Guidelines, FL08-STD-91A001, Version 06.03
[4]
Document Template, FL08-STD-98A044, Version 01.03
[5]
Software Requirements Specification Guidelines, FL08-STD-94A049, Version 01.02
1.
Install FLASHZap client R01.28.00 or later.
2.
Launch “StopcopyInfoTool” as shown below.
3.
Note down “Applicable procedure” value and “Current Drive” letter. (In
our example, ““Current drive” is “D” and “Applicable procedure” is “A””.
4.
Launch “AuthmanW” as shown below.
5.
Click on “Modify” in “AuthmanW” application.
6.
Enter “FLASHZP” in “Authorization Name” field. Then Select “Authorization Drive” that you wrote down when executing the “StopcopyInfoTool”
7.
Select “Stopcopy” folder as shown below. First image shows how to scroll
down to find stopcopy folder. Second Image shows to select stopcopy folder.
Third image show to double click the stopcopy folder. Click “OK”. If you
receive any error after click on “OK” button, then use “Appendix A” to find resolution and start from step 4.
8.
Note down “User Code”. It is “010064” in our example.
9.
If “Applicable procedure” is “A”, then use following Procedure A Section 3. If it is “B”, then jump to Procedure B Section 4.
10.
Don’t click on “modify”.
1.
Copy-paste email “Content”, “Subject” and “TO” fields from below to your
email editor (Outlook, hotmail, etc). Fill out yellow
highlighted fields, and send email.
------------------------------ Email
Request Begin -------------------------------
To: [email protected]
Subject: Request for FLASHZap client
stopcopy authorization
Email Content:
SOFTWARE USER AGREEMENT
INFORMATION PROTECTION AND NON-DISCLOSURE AGREEMENT
Radio maintenance software developed by Motorola engineers is a
valuable asset that contributes to customer satisfaction, product success and
future growth. Depot-level and lab-level maintenance tools are very powerful
and, in the wrong hands, could be used to make unauthorized product upgrades or
to give radio users unauthorized access to Motorola trunking systems.
Therefore, we must take every reasonable precaution necessary to protect this
valuable Intellectual Property and, as a result, Motorola's profitability. As
an associate involved in the development of software listed below or having
been issued a copy of the software listed below, I acknowledge and will comply
with the following user responsibilities:
A. I agree to make no unauthorized copies of the software
under any circumstances.
B. I agree not to allow use of the software by any other
associate or outsiders, including clients, customers and others without
specific authorization.
C. I agree to properly classify and protect this
sensitive information according to the Motorola information security
classifications standards (POPI).
D. I agree to physically secure the diskettes, or other
removable storage media on which the software resides, to prevent unauthorized
use or theft.
E. I agree to secure my computer devices, through the use
of physical means and Motorola-furnished security software and/or devices, to
prevent unauthorized access and theft.
F. I will not give a copy to anyone without first
obtaining a signed Software User Agreement from that person.
This agreement includes all past, current and future
versions of the following software:
Software Name(s): FLASHZAP Client
________________________________________________________________________________
NOTE: Corporate Human Resource Policy #6 classifies
unauthorized disclosure of confidential company information as a Class III
infraction. Such infractions are serious in nature and normally result in
termination of employment.
By signing, I agree to adhere to the policy and personal
responsibilities stated in this agreement. I have received a copy of and read
the Plantation Radio Software Security Policy P-5.
Core ID: __________
UserCode: _________
(Copy from Authmanw.exe tool)
I need offline security for
FLASHZap client because ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Number of Days: __________
(Between 1-365. Caution: You can update (not add) number of days. For example,
you have 4 days left on your computer. You ask for 10 days. At the end of
activation you will have 10 days on your computer not 14 days.)
I need offline security for
FLASHZap client for the number of days listed above because ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Applicable Procedure : _A_
Reset Code : ____<to be assigned by license
manager>____ (Caution:
Don’t copy paste the space with “Reset Code”. Entering space in Reset Code
field of authmanw will create failure).
______________________________________ ______________________________________
PRINT NAME DATE
SIGNED
______________________________________ ______________________________________
Electronic SIGNATURE (Just print your name again) Phone
------------------------------ Email
Request End -------------------------------
2.
Wait for email reply, which will contain “Reset Code” in green highlighted area.
3.
Follow step 2-8 from “Steps” section 2.
4.
Verify “User Code” and “Applicable Procedure”. It should be same in the
email and “AuthmanW” and “StopcopyInfoTool” as shown below. Copy the “Reset
code” from email to “AuthmanW” as shown below. Click on “Modify” button in the
“AuthmanW”. (Caution: Don’t copy paste the space
with “Reset Code”. Entering space in Reset Code field of authmanw will create
failure).
5.
“AuthmanW” should report “Operation successful” as below.
6.
Follow “final steps” section 5 to complete procedure.
1.
Copy-paste email “Content”, “Subject” and “TO” fields from below to your
email editor (Outlook, hotmail, etc). Fill out yellow
highlighted fields, and send email.
------------------------------ Email
Request Begin -------------------------------
To: [email protected]
Subject: Request for FLASHZap client
stopcopy authorization
Email Content:
SOFTWARE USER AGREEMENT
INFORMATION PROTECTION AND NON-DISCLOSURE AGREEMENT
Radio maintenance software developed by Motorola engineers is a
valuable asset that contributes to customer satisfaction, product success and
future growth. Depot-level and lab-level maintenance tools are very powerful
and, in the wrong hands, could be used to make unauthorized product upgrades or
to give radio users unauthorized access to Motorola trunking systems.
Therefore, we must take every reasonable precaution necessary to protect this
valuable Intellectual Property and, as a result, Motorola's profitability. As
an associate involved in the development of software listed below or having
been issued a copy of the software listed below, I acknowledge and will comply
with the following user responsibilities:
A. I agree to make no unauthorized copies of the software
under any circumstances.
B. I agree not to allow use of the software by any other
associate or outsiders, including clients, customers and others without
specific authorization.
C. I agree to properly classify and protect this
sensitive information according to the Motorola information security
classifications standards (POPI).
D. I agree to physically secure the diskettes, or other
removable storage media on which the software resides, to prevent unauthorized
use or theft.
E. I agree to secure my computer devices, through the use
of physical means and Motorola-furnished security software and/or devices, to
prevent unauthorized access and theft.
F. I will not give a copy to anyone without first
obtaining a signed Software User Agreement from that person.
This agreement includes all past, current and future
versions of the following software:
Software Name(s): FLASHZAP Client
________________________________________________________________________________
NOTE: Corporate Human Resource Policy #6 classifies
unauthorized disclosure of confidential company information as a Class III
infraction. Such infractions are serious in nature and normally result in
termination of employment.
By signing, I agree to adhere to the policy and personal
responsibilities stated in this agreement. I have received a copy of and read
the Plantation Radio Software Security Policy P-5.
Core ID: __________
UserCode: _________
(Copy from Authmanw.exe tool)
I need offline security for
FLASHZap client because ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Number of Days: __________
(Between 1-365)
I need offline security for
FLASHZap client for the number of days listed above because ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Applicable Procedure : _B_
Activation Code: __<to be assigned by license
manager>___
Reset Code : ___<to be assigned by license
manager>____ (Caution:
Don’t copy paste the space with “Activation code” and “Reset Code”. Entering
space in “Activation code” or “Reset Code” field of authmanw will create
failure).
______________________________________ ______________________________________
PRINT NAME DATE
SIGNED
______________________________________ ______________________________________
Electronic SIGNATURE (Just print your name again) Phone
------------------------------ Email
Request End -------------------------------
2.
Wait for email reply, which will contain “Activation Code” and “Reset
Code” in green highlighted area.
3.
Follow step 2-8 from “Steps” section 2.
4.
Verify “User Code” and “Applicable Procedure”. It should be same in the
email and “AuthmanW” and “StopcopyInfoTool” as shown below. Copy the “Activation
Code” and “Reset code” from email to “AuthmanW” as shown below. Click on
“Modify” button in the “AuthmanW”. (Caution:
Don’t copy paste the space with “Activation code” and “Reset Code”. Entering
space in “Activation code” or “Reset Code” field of authmanw will create
failure).
5.
“AuthmanW” should report “Operation successful” as below.
6.
Follow “final steps” section 5 to complete procedure.
1.
Launch “StopcopyInfoTool” as shown below.
2.
Verify the number of days remaining as shown below and compare it with
what you requested in the email. They should match.
3.
Congratulations!! You have just activated FLASHZap client to work
offline.
1.
Error: “(00) Fatal error with specified program!” 
a. Solution: This
problem happens if correct Authorization name “FLASHZP” is not entered as shown
below. In that case, click OK on error message, and restart from Step 5 of
section 2 (Click on “Modify”).
b. Solution: Run “Solve_Error00”
as shown below.
2.
Error: “(42) Inactive authorization already exists on target drive!” 
a. Solution: Run “Solve_Error42_error02”
as shown below.
3.
Error: “(02) Authorization already exists on target drive!” 
a. Solution: Run “Solve_Error42_error02”
as shown below.
4.
Error: “(01) Invalid Reset/Activation code!” 
a. Solution: You
might entered the activation or reset code with the Space (“ ”). Close authmanw,
and you need to start from very first step, and you would get new “User Code”
from Authmanw, so you would need new “Reset code” and/or “Activation code”.
b. Other possibility:
You might get this error because your “UserCode” doesn’t match with “Activation
code” and/or “Reset Code”.
c. Other
possibility: Typing error while entering “Activation code” and/or “Reset Code”.
