NTP Configuration Tab for Channel Cluster Configuration
This section provides a table showing the fields on the NTP Configuration tab which are used for configuring channel clusters. For each field, the field name, default value, range of values, and description are shown along with whether the field is editable.
In the following table, all fields are editable unless there is a note in the description field which says you cannot edit the field.
| Field | Default Value | Range of Values | Description |
|---|---|---|---|
| NTP Service | Enabled | Enabled or Disabled | Specifies whether NTP service is enabled or disabled. If NTP Service is set to Enabled, the site should utilize time from an NTP server. If NTP Service is set to Disabled, the MLC 8000 Configuration Tool downloads its PC time to the devices. |
| Primary NTP Server Address | N/A | The allowable values are 0 to 255 for each of the four components of the IP address. | If the NTP Service field is set to Enabled, specify the Primary NTP Server IP address in this field. This field is mandatory if NTP service has been enabled. |
| Backup NTP Server Address | N/A | The allowable values are 0 to 255 for each of the four components of the IP address. | If the NTP Service field is set to Enabled, specify a backup NTP server IP address (optional). |