IP Configuration Tab for MLC 8000 Subsite Link Converter Configuration in an IP Simulcast System
This section provides information on the fields that make up the IP Configuration Tab for MLC 8000 Subsite Link Converter configuration in an IP Simulcast system. For each field, the field name, default value, range of values, and description are provided.
In the following table, all fields are editable unless a note in the description column indicates otherwise.
| Field | Default Value | Range of Values | Description |
|---|---|---|---|
| Use the following IP address | Checked | Checked | Specifies that the IP address entered manually into the fields that follow is used. |
| IP Address | 0.0.0.0 | As per System Configuration Plan ICD - IP Plan | Specifies the IP address of the MLC 8000 Subsite Link Converter.
NoteFor MLC 8000s implemented in ASTRO
® 25 systems, contact your system administrator for the appropriate IP address.
|
| Subnet Mask | 0.0.0.0 | As per System Configuration Plan ICD - IP Plan | Specifies the subnet mask address. |
| Default Gateway | 0.0.0.0 | As per System Configuration Plan ICD - IP Plan | Specifies the default gateway. |
| Speed & Duplex | Auto | 10 Mb Full, 10 Mb Half, 100 Mb Full, 100 Mb Half, Auto | Specifies the speed and whether it is half-duplex or full-duplex. |