IP Configuration Tab for MLC 8000 Subsite Link Converter Configuration in a Non IP Simulcast System
This section provides information on the fields that make up the IP Configuration Tab for MLC 8000 Subsite Link Converter configuration in a non IP simulcast system. For each field, the field name, default value, range of values, and description are provided.
In the following table, all fields are editable unless a note in the description column indicates otherwise.
| Field | Default Value | Range of Values | Description |
|---|---|---|---|
| Use the following IP address | Checked | Checked | Specifies that the IP address entered manually into the fields that follow is used. |
| IP Address | 0.0.0.0 | As per System Configuration Plan ICD - IP Plan | Specifies the IP address of the MLC 8000 Subsite Link Converter.
NoteFor MLC 8000s implemented in ASTRO
® 25 systems, contact your system administrator for the appropriate IP address.
|
| Subnet Mask | 0.0.0.0 | As per System Configuration Plan ICD - IP Plan | Specifies the subnet mask address. |
| Default Gateway | 0.0.0.0 | As per System Configuration Plan ICD - IP Plan | Specifies the default gateway. |
| Speed & Duplex | Auto | 10 Mb Full, 10 Mb Half, 100 Mb Full, 100 Mb Half, Auto | Specifies the speed and whether it is half-duplex or full-duplex. |