Implementing an ASTRO 25 Circuit-Based Analog-Only Simulcast Voting Subsystem

Prerequisites:

See Implementing MLC 8000s.

When and where to use:

Follow these sequences when implementing MLC 8000s in an ASTRO ® 25 Circuit-Based Analog-Only Simulcast Voting subsystem.

Procedure:

  1. Perform the tasks to install equipment at the prime site. See Installing Equipment for Each Channel in the Prime Site.
  2. Configure the MLC 8000 devices with the MLC 8000 Configuration Tool. See Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool.
  3. Verify the installation and configuration performed in this implementation. See Verifying the Installation and Configuration.