Audio Levels for Base Radios for Analog or Mixed Mode
Parameters are set to configure base radios when they interface to the Site Gateway (Conventional Channel Interface).
The following table shows recommended values for audio level parameter settings for the analog GTR 8000, MTR 3000 and MTR 2000 base radios.
| Parameter | Value | |
|---|---|---|
| Unity Gain 4-Wire Analog Media | Lossy 4-Wire Analog Media | |
| Rx Wireline Level (on the Rx Wireline Alignment tab of the Alignment Screen window) | -10 dBm | -5 dBm |
| Status Tone (Common tab of the Infrastructure Interface window) | Enabled | Enabled |
| Tx Wireline Level (on the Tx Wireline Alignment tab of the Alignment Screen window) | -10 dBm | -21 dBm |
| Analog Repeater Boost (Key Up Controls tab of the Channel Configuration window) | Disabled | Disabled |