4W MLC 8000 to Channel Bank DSM-II Card Cable Open End (Circuit-Based Simulcast)

4W MLC 8000 to Channel Bank Cable (Circuit-Based Simulcast), RJ45 to Open End Cable
NoteUse the open-ended cable with the punch block.
4W MLC 8000 to Channel Bank DSM-II Card Cable Open End (Circuit-Based Simulcast)
End A,     End B,    
MLC 8000 (RJ45)   TeNSr punch block
Pin No. Signal Wire Color Pin No. Signal Notes
1 Audio Out + White/Orange Not Connected TX Audio+ CB TX+
2 Audio Out - Orange Not Connected TX Audio‐ CB TX‐
3 Audio In + White/Blue 27* RX Audio+ CB RX+
4 Audio IN - Blue 2* RX Audio- CB RX‐
5 Channel Active White/Brown Not Connected M2 Input  
6 PTT from Console White/Green Not Connected    
7 5V Brown Not Connected    
8 VGND Green Not Connected M1 Input  
Note*Pin numbers indicated are for the first port of the device; may differ if other ports are used. See the channel bank manufacturer's documentation.