Other Considerations for Implementing MLC 8000s at Trunking Simulcast Sites

Perform a site audit of existing Trunked equipment to determine whether the Ethernet port and IP address capacity is available for the additional equipment required by the Analog IP Conventional Simulcast architecture. Each additional station and MLC 8000 device at the subsite or Base Radio Site requires an IP address and switch port.

Though not explicitly limited by the software or hardware, you should not expect to add more than ten Conventional stations to any single subsite or Base Radio Site as this is considered an uncertified configuration.

Additionally, Conventional base radios can be installed in a Trunking Expandable Site Subsystem if there are at most four open positions (existing functionality).