Initial Setup and Configuration This section contains instructions for the configuration of the system software for initial operation. Use these instructions and the provided checklist to ensure you have properly configured your WAVE 3000 Server system with the correct IP addresses and ports. Pre-Configuration Steps Connect Physical System Components This is the initial hardware connection and configuration included in print with the WAVE 3000 Server unit. If you have already connected your WAVE 3000 Server and set the Radio System Adapter and the Broadband adapter IP addresses, then skip this step and proceed with connecting to the XRT 9000/9100 Gateway. Connecting Physical System Components Connect to the XRT 9000/9100 Console Connect to the XRT 9000/9100 Gateway through the console application. Accessing the XRT 9000/9100 Gateway Add Users and Talk Groups Add radio users, cell phone users, and Talk Groups to the Connect Plus system. Adding Users and Groups to the XRT 9000/9100 Configuring WAVE 3000 Server as a User Add and configure the WAVE 3000 Server as a user of the XRT 9000/9100 Gateway. Adding and Configuring the XRT 9000/9100 WAVE 3000 Server User Test Connect Plus Radios Test radio communication with Connect Plus users to ensure radios can communicate over Talk Groups. Testing Connect Plus Radios Configuration Steps Access WAVE 3000 Server Sign-in to the WAVE 3000 Server administrator interface. Accessing the WAVE 3000 Server Change Administrative Password Optionally, and for security reasons, you can change the WAVE 3000 Server password. Changing the Administrator Password Select Connect Plus Radio System Select Connect Plus as the WAVE 3000 radio system. Specifying the Radio System Interface Configure Connect Plus Network Connections Supply radio network configuration information. Configuring Connect Plus Network Connections Configure WAVE 3000 Network Connections Supply internet configuration information. Configuring WAVE 3000 Network Connections Configure Connect Plus XRT 9000/9100 Interfaces Supply XRT 9000/9100 configuration information. Configuring Connect Plus Network Connections Configure Broadband Clients Supply broadband client connection information. Configuring Broadband Clients Add and Allocate CALs (EID) Licenses If you have not received EIDs from Motorola, they you must obtain them. WAVE 3000 Server will not operate without valid EIDs. Add your EIDs and allocate your CALs. Adding and Allocating Licenses Add WAVE Users Create and add WAVE Mobile Communicator users. Adding WAVE Users Add Radio Users Create and add Connect Plus radio users. Adding Radio Users Add Talk Groups Create and add Talk Groups from Connect Plus to the WAVE 3000 Server. Adding Talk Groups Associate WAVE Users and Talk Groups Add one or more Talk Groups to each WAVE Mobile Communicator user. Associating WAVE Users and Talk Groups Add Contacts to Users for Private Calls Add contacts for Connect Plus and WAVE Mobile Communicator users. Users can initiate private connections with any of the users in their Contacts list. Adding Contacts for Private Calls Commit Changes Committing Changes activates all current modifications to the WAVE 3000 Server. Committing automatically validates changes and notifies you of errors. Correct any errors encountered. Committing Changes Post-Configuration Steps Install WAVE Mobile Communicator Clients Download and install WAVE Mobile Communicator clients to cell phones. Installing WAVE Mobile Communicator Clients Test and Radio / WAVE Client Communication Test Radio to WAVE Mobile Communicator communication. Test WAVE Mobile Communicator to WAVE Mobile Communicator communication. Testing Radio and WAVE Communication Test Private Calls Ensure users can establish Private Calls with those users in their Contacts list. Testing Private Calls Troubleshoot This section provides information regarding common errors, and provides solutions and workarounds. Troubleshooting
