Initial Setup and Configuration

This section contains step-by-step instructions for the configuration of the WAVE 3000 system software for initial operation. Use these instructions and the provided checklist to ensure you have properly configured your WAVE 3000 Server system with the correct IP addresses and ports.

Pre-Configuration Steps
	Connect Physical System Components This is the initial hardware connection and configuration included in print with the WAVE 3000 Server unit. If you have already connected your WAVE 3000 Server and set Broadband Adapter and Radio Adapter IP addresses, then skip this step and proceed with configuration. Connecting Physical System Components
Configuration Steps
	Access WAVE 3000 Server Sign-in to the WAVE 3000 Server administrator interface. Accessing the WAVE 3000 Server
	Change Administrative Password Optionally, and for security reasons, you can change the WAVE 3000 Server password. Changing the Administrator Password
	Change Radio System to Linked Capacity Plus Select Linked Capacity Plus as the associated Radio System Interface Specifying the Radio System Interface
	Obtain Linked Capacity Plus Radio Information Gather all information from Linked Capacity Plus required to configure the WAVE 3000 Server. Obtaining Linked Capacity Plus Information
	Configure the Linked Capacity Plus Network Interface Set up addresses, ports, and options for WAVE 3000 Server to Linked Capacity Plus connectivity. Configuring Linked Capacity Plus Network Connections
	Configure the WAVE 3000 Network Interface Set up addresses, ports, and options for WAVE 3000 to connect with the internet. Configuring WAVE 3000 Network Connections
	Configure Broadband Clients Enter required setup information for broadband client connectivity. Configuring Broadband Clients
	Add and Allocate CALs (EID) Licenses If you have not received EIDs from Motorola, they you must obtain them. WAVE 3000 Server will not operate without valid EIDs. Add your EIDs and allocate your CALs. Adding and Allocating Licenses
	Create Broadband Users Create accounts for each broadband (WAVE) user. Adding WAVE Users
	Create Radio Users Create accounts for each Linked Capacity Plus radio user based on Unit ID. This allows Private Calls to broadband clients and provides broadband clients with an alias for the radio user. Adding Radio Users
	Create Talk Groups Create Talk Groups for the Groups in Linked Capacity Plus that you want to communicate with broadband clients. Adding Talk Groups
	Associate Broadband Users and Talk Groups Assign Talk Groups to broadband users. Associating WAVE Broadband Users and Talk Groups
	Add Contacts to Broadband Private Call Lists Give each broadband user a list of radio and broadband users they can call. Adding Contacts for Private Calls
	Commit All Changes and Validate Commit changes and correct any errors identified during validation. Committing Changes
Post-Configuration Steps
	Install Mobile Communicator Clients Download and install WAVE Mobile Communicator clients. WAVE Client Information
	Test Group Communication Ensure Talk Group communication is functioning correctly. Testing Radio and WAVE Communication
	Test Private Calling Ensure users can initiate Private Calls. Testing Private Calls
	Add Contacts to Broadband Private Call Lists Give each broadband user a list of radio and broadband users they can call. Configuring a WAVE 3000 Server for Local Area Networks
	Troubleshoot This section provides information regarding common errors, and provides solutions and workarounds. Troubleshooting