Default Operator Id: User defined
Default Hardware Category: Select hardware type
Default Management VLAN ID: The default VLAN ID to use for management traffic is the BS TRx is configured to use a VLAN for management traffic. This applies to all types of BS TRx. Default 4094
Default Port VLAN ID – The port VLAN ID is the VLAN ID associated with untagged traffic when a port is in Check And Untag mode. This quantity defines the default VLAN ID to use on both BS TRx and SS ports. Default 4093.
Default Reserved VLAN ID #1 #2 #3. These are the VLAN IDs used internally within the MicroMAX BS TRx. They do not apply to any other BS TRx type. Defaults 4090, 4091, 4092
BS TRx Discovery Site: This allows the user to specify which site newly discovered BS TRxs will be added.
This section sets the service configuration that will be applied to a newly discovered SS.
Service Product: Select from drop list. See Service Products.
VLAN Port Template: Select from drop list. See VLAN Configurations.
SS Custom Configuration: Select from drop list. See Discovery Task.
Security Policy: Select from Basic, Medium or High.
Basic Security Policy is defined by what is implemented in Netspan SR5. This is a default policy.
Medium Security Policy applies stricter rules on what strings are acceptable for password, eliminates obvious strings like “password”, “pass” and enforces password change of first login of a new user.
High Security Policy, in addition to Medium one, introduces strict password recycling with configurable expiry period.
BS TRx Ethernet Stats/ BS TRx Air Interface Stats: BS TRx Statistics. Enable for statistics collection.
SS Ethernet Stats/ SS Air Interface StatsSS RF Stats/SS Modulation Stats/ SS Packet Counts: SS Statistics. Enable for statistics collection.
User Activity Logging
Most user actions are logged in user activity log. For the purpose of activity logging user is either Netspan login user or Netspan service. The log stores the type of action but does not store low level details of the action e.g. BS TRx Channel provisioning change is logged but which properties have changed is not be stored in the log.
The user activity log is archived daily in the file stored in the directory:<Netspan Data Root>\Logs\Activity
The log files have csv extension and can be directly open by Excel.
The log can be archived on request by clicking the Make Log Now button page.
The content of the log is as good as the information available in the place doing the log. There is no intention to change software design to satisfy the requirements of the log. Instead the log is used as an independent tool as is.
The columns in the user activity log are:
1. Date and time
2. Miliseconds
3. Performed by (user name or service name)
4. Action (explicit string defining user action e.g. Visit, DBCreate, DBDelete, …)
5. Resource (explicit string identifying resource e.g. BS TRx, SS, List:BS TRx)
6. Instance (string identifying resource instance e.g. ‘Id:000000:003548;DBID:1’)
7. Status (string defining status of the action e.g. OK, Failed etc.)
See Action Buttons