The EasyST/ProST has a pre-configured default IP address (10.0.0.1) subnet mask (255.255.255.240) that is used to access to and communicate with the embedded WiMAX Web server.
To access the embedded WiMAX Web server:
Select the requires SS from the list of SSs and click the manage button.
Click the remote management tab.
The home page of the WiMAXWeb tool opens, as displayed below:
The WBM provides a user-friendly graphical user interface (GUI) that allows you to easily access commands to configure and view your EasyST/ProST configuration parameters.
The menu bar at the top of the page provides links (menus) to various configuration categories. This menu bar is displayed throughout the WBM pages to allow easy navigation between categories.
The menus on the WBM menu bar are described in the table below:
|
Menu |
Description |
|
Opens the System page, which displays EasyST/ProST identification parameters such as serial number and software version | |
|
Opens the Signal Parameters page, which displays signaling parameters such as frequency and RSS | |
|
Opens the Addresses page, which displays addresses such as the EasyST/ProST Ethernet MAC address and IP address | |
|
Opens the Log page, which displays logged traps and their severity levels | |
|
Opens the Advanced page for performing advanced configuration settings such as software upgrade, defining frequency channels and associated base stations, and restarting the unit (Access allowed only by authorized technicians) |
The table below describes basic WBM navigation procedures:
|
To ... |
Do this ... |
|
Navigate to a specific configuration category |
Click the relevant menu on the menu bar. |
|
Return to the home page |
Click the browser's Back button until the home page is displayed or click the System menu. |
|
Quit WiMAXWeb |
Click the Web browser's Close button located in the top-right corner of the browser's window. |