Slider to HLGT Signal Power Range
This section provides a table showing the slider value to be associated with a particular measured HLGT signal power range.
Use this table to determine the appropriate slider value for a particular measured input signal power range. For information on calculating power, see Performing Calibration for an MLC 8000 Analog Comparator for a TRC Console.
| Measured Input Signal Power Range (dBm) | Slider Value (Steps) |
|---|---|
| 18.5 to 17 | 1 |
| 17 to 15.5 | 2 |
| 15.5 to 14 | 3 |
| 14 to 12.5 | 4 |
| 12.5 to 11 | 5 |
| 11 to 9.5 | 6 |
| 9.5 to 8 | 7 |
| 8 to 6.5 | 8 |
| 6.5 to 5 | 9 |
| 5 to 3.5 | 10 |
| 3.5 to 2 | 11 |
| 2 to 0.5 | 12 |
| 0.5 to -1 | 13 |
| -1 to -2.5 | 14 |
| -2.5 to -4 | 15 |
| -4 to -5.5 | 16 |
| -5.5 to -7 | 17 |
| -7 to -8.5 | 18 |
| -8.5 to -10 | 19 |
| -10 to -11.5 | 20 |
| -11.5 to -13 | 21 |
| -13 to -14.5 | 22 |
| -14.5 to -16 | 23 |
| -16 to -17.5 | 24 |
| -17.5 to -19 | 25 |