Calibrating Conventional Analog IP Simulcast

Prerequisites:

When the MLC 8000 is configured for IP Simulcast, the base radios have to be the same type.

When and where to use:

Use this process to calibrate conventional analog IP simulcast systems.

Procedure:

  1. Set up the test equipment. See “Setting Up Test Equipment” in the MLC 8000 Setup Guide.
  2. Perform a coarse level PL/DPL adjustment. See procedure Performing Coarse Level PL/DPL Adjustment (Conventional Systems).
  3. Perform fine amplitude adjustment. See procedure Performing Fine Amplitude Adjustment .
  4. Perform a final system level check. See procedure Performing a Final System-Level Check .