Preparing PC with MLC 8000 Configuration Tool for Prestaging Activities

Prerequisites:

The MLC 8000 Configuration Tool is operational on the PC used for prestaging activities. See procedure Opening the MLC 8000 Configuration Tool.

When and where to use:

Use this procedure to prepare the PC with the MLC 8000 Configuration Tool installed that you are using to perform prestaging activities. Prestaging activities include assigning an initial IP address to fresh MLC 8000 devices and upgrading software on these new MLC 8000 devices.

Procedure:

  1. Assign the following IP address and subnet mask to the LAN card on the PC:
    • IP Address: 10.98.66.97
    • Subnet Mask: 255.255.255.0
    ImportantRecord the original IP address and netmask settings for your PC first so you can re-enter them when you are done with prestaging tasks.
  2. Open the MLC 8000 Configuration Tool.
    The MLC 8000 Configuration Tool main window opens.