Subscriber Stations

Note: Double clicking a list item opens the Subscriber Station Management screen.

Filter: Filters are used to limit the number of rows displayed in the grid by providing specific query criteria. The query results are limited to 200 rows. The actual number of rows is displayed on the pager bar when grid is paged. To refine results and narrow search select the appropriate filter. Below is a list of system filters, in addition there may be user defined filters.

: This button allows user defined criteria to be added/edited. System criteria are locked and may not be edited.
: Lists all criteria see Filters.
Alarm Status(in order of increasing severity)

Normal: Previous alarm has been cleared

Warning:

Minor:

Major:

Critical:

Indeterminate: Netspan has been unable to determine alarm severity.

MAC Address: MAC address
IP Address: IP address assigned to the SS Clicking on the IP address opens the Remote Management window.
Registered: Checked = Registered.
Service Enabled: Checked = Enabled.
Service Product: See Service Products.
Configuration Profile: Modulation Used.
Port VLAN Profile: Service profile.
Service Allowed Channel: Channel allowed. See Edit Subscriber Station Provisioning.
Last Seen On Channel: Last channel to have established a link with the SS.
Provisioning Error Count: Netspan will provision the SS on every BS TRx it is deemed to have been recently seen on unless constrained by the specification of a home BS TRx for that SS. The Provisioning Error Count is the number of BS TRxs from this set on which there has been a failure to provision this SS.
Provisioning Changes. Provisioning changes counted.
Hardware Type: Hardware Type.
Description(1-5): User defined.
Discovered: Checked if SS has been discovered by a BS TRx.
Integrated Wi-Fi Access Point IP: IP address of Wi-Fi access.
Integrated EasyVoice Access: IP address of EasyVoice access.
Channel BSID: Channel BSID.
Channel BSID Mask: Channel BSID mask.
Channel BSID and Mask Config: Indicates if mask is set.