Use this feature when applying a change to more than one subscriber station at a time.
Select the SSs to be changed from the Subscriber Station list. Click the edit button.
The selected SSs appear in the list at the top of the screen.
Description 1-5: User defined.
Service Enabled: Places the SS in service.
Service Product: Select Service Product from drop list. See Service Products.
Config Profile: Select from drop list. See SS Custom Configuration
Port VLAN Profile: Select from drop list. VLAN Configurations
Service Enabled: Yes = in service, No = out of service
Service Allowed Channel: Use to select the service channel for this SS. (Any) set for nomadic use.
It is possible to restrict the BS TRx Channels on which an SS may register. The list of allowed channels for registration is specified by applying a Channel BSID Mask to a Channel BSID. The list of matching BS TRx Channels is displayed as Selected Channels. Care must be taken when restricting the BS TRx Channels on which an SS may register. If the SS is not within range of any of the allowed BS TRx Channels, it will result in the SS becoming uncontactable and a site visit may be required to restore service to the SS.
Allowed channels configuration: Select enable to configure.
Restrict allowed channels: Check box to open restriction selection.
Channel BSID: Channel BSID
Channel BSID Mask: See Add/Edit Subscriber Station Provisioning
Selected Channels: List of channels that are available to the SS after the mask is applies selected
SNMP communication requires a manager and an agent (SS). SNMP provides the language and the rules that the manager and agent use to communicate. The manager sends requests to an SS (either to send information or to set a parameter), and an SS provide the requested data or set the parameter. SS's can also notify the manager independently through unsolicited trap messages, which indicate that certain events have occurred. Management Information Bases (MIBs) define what can be monitored and controlled within a device.
Check boxes to enable access to each field this section.
Port: Agent port number for the subscriber.
SNMP Version: Select version. Netspan supports SNMP V2c.
Read Community: Sets SNMP privacy parameters private/public. Default is public.
Write Community: Sets SNMP privacy parameters private/public. Default is private.
Timeout: The number of milliseconds that the manager waits for a response.
When OK is clicked the changes are applied to the SSs listed.