Home
Print
Bookmark
Show in toc
Previous Topic
Parent Topic
Next Topic
Contents
Bookmarks
Search
MLC 8000 Setup Guide
Common Information for MLC 8000 Implementations
Navigating This Guide
Implementing MLC 8000s
MLC 8000 Devices Per Site Type
Examples of Subsystems Where MLC 8000s Can Be Used
MLC 8000 Ports and LEDs
MLC 8000 Hardware Views
MLC 8000 Safety and General Information
MLC 8000 Configuration Tool with Analog Display and Control Set Up
Setting Up the MCN Server 8000 Remote Comparator Display Software
MLC 8000 Software and Configuration Updates
MLC 8000 Password Setup
Optimization/Calibration for Conventional Simulcast
Considerations for Implementing MLC 8000s at Existing Trunking Sites
Examples of Trunking Configurations That Can Share Equipment
Channel Capacity Constraints When Conventional Shares Equipment With Trunking
Ethernet Bandwidth Considerations for MLC 8000s
Other Considerations for Implementing MLC 8000s at Trunking Simulcast Sites
Simulcast Site Reference Considerations
Jitter Buffer Considerations for Simulcast and Non-Simulcast
Configuring GTR 8000 Base Radios with CSS
GTR 8000 Configuration Settings
Conventional Configuration Settings for Analog Simulcast
Conventional Configuration Settings for Non Simulcast
Alignment Screen Settings
MLC 8000 Analog Comparator Parameters
Configuration Manager Settings
Installing MLC 8000s with Off-Site Preconfiguration
ASTRO 25 Analog-Only Non-Simulcast Voting Subsystem
Implementing an ASTRO 25 Analog-Only Non-Simulcast Voting Subsystem
Installing Equipment for Each Channel in the Prime Site
Installing Equipment For Each Channel in Subsites
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
ASTRO 25 Analog-Only Non-Simulcast Voting Subsystem Equipment Cabling
ASTRO 25 Analog-Only Non-Simulcast Voting Subsystem Troubleshooting
ASTRO 25 Analog-Only IP-Based Simulcast Subsystem
Implementing an ASTRO 25 Analog-Only IP-Based Simulcast Subsystem
Installing Equipment for Each Channel in the Prime Site
Installing Equipment for Each Channel in Subsites
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
ASTRO 25 Analog-Only IP-Based Simulcast Subsystem Equipment Cabling
Cabling MLC 8000 to SDM3000 RTU
MLC 8000 Link Converter and MOSCAD NFM I/O Monitoring Indications (IP Simulcast)
MLC 8000 Link Converter MOSCAD NFM I/O Monitoring Indications (Non IP Simulcast)
MLC 8000 Analog Comparator and MOSCAD NFM I/O Monitoring Indications (IP Simulcast)
MLC 8000 Analog Comparator and MOSCAD NFM I/O Monitoring Indications (Non IP Simulcast)
ASTRO 25 Analog-Only IP-Based Simulcast Subsystem Troubleshooting
ASTRO 25 Mixed-Mode Non-Simulcast Voting Subsystem
Implementing an ASTRO 25 Mixed-Mode Non-Simulcast Voting Subsystem
Installing Equipment for Each Channel in the Prime Site
Installing Equipment for Each Channel in Subsites
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
ASTRO 25 Mixed-Mode Non-Simulcast Voting Subsystem Equipment Cabling
ASTRO 25 Mixed-Mode Non-Simulcast Voting Subsystem Troubleshooting
ASTRO 25 Conventional Mixed-Mode Simulcast Voting Subsystem
Implementing an ASTRO 25 Conventional Mixed-Mode Simulcast Voting Subsystem
Installing Equipment for Each Channel in the Prime Site
Installing Equipment for Each Channel in Subsites
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
ASTRO 25 Conventional Mixed-Mode Simulcast Voting Subsystem Equipment Cabling
ASTRO 25 Conventional Mixed-Mode Simulcast Voting Subsystem Troubleshooting
ASTRO 25 Digital-Only Simulcast Voting Subsystem
Implementing an ASTRO 25 Digital-Only Simulcast Voting Subsystem
Installing Equipment for Each Channel in Subsites
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
ASTRO 25 Digital-Only Simulcast Voting Subsystem Equipment Cabling
ASTRO 25 Circuit-Based Analog-Only Simulcast Voting Subsystem
Implementing an ASTRO 25 Circuit-Based Analog-Only Simulcast Voting Subsystem
Installing Equipment for Each Channel in the Prime Site
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
ASTRO 25 Circuit-Based Analog-Only Simulcast Voting Subsystem Equipment Cabling
ASTRO 25 Circuit-Based Analog-Only Simulcast Voting Subsystem Troubleshooting
Circuit-Based Analog-Only Simulcast Voting Subsystem
Implementing a Circuit-Based Analog-Only Simulcast Voting Subsystem
Installing Equipment for Each Channel in the Prime Site
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
Circuit-Based Analog-Only Simulcast Voting Subsystem Equipment Cabling
Circuit-Based Analog-Only Simulcast Voting Subsystem Troubleshooting
Analog-Only IP-Based Simulcast Voting Subsystem
Implementing an Analog-Only IP-Based Simulcast Voting Subsystem
Installing Equipment for Each Channel in the Prime Site
Installing Equipment for Each Channel in Subsites
Configuring MLC 8000 Devices with the MLC 8000 Configuration Tool
Verifying the Installation and Configuration
Analog-Only IP-Based Simulcast Voting Subsystem Equipment Cabling
Analog-Only IP-Based Simulcast Voting Subsystem Troubleshooting
MLC 8000 Radio Ports Cabling
MLC 8000 to SDM3000 RTU Cable
4W MLC 8000 to GTR 8000 Cable (IP Simulcast)
4W MLC 8000 to GTR 8000 Cable (IP Simulcast) for Punch Block to 50-Pin Telco and RJ45 Connectors
4W MLC 8000 to GTR 8000 Cable (IP Simulcast) for DLN6821A Cable Assembly Connection
RJ45-to-T57 Telco Adapter for DLN6812A GTR 8000 Cable Assembly Connection (IP Simulcast)
4W MLC 8000 to GTR 8000 Cable (Non-Simulcast)
4W MLC 8000 to GTR 8000 Cable (Non-Simulcast) TRC
4W MLC 8000 to GTR 8000 Cable (Non-Simulcast) Open End
4W MLC 8000 to GTR 8000 Cable (Non-Simulcast) for T57 DLN6821A Cable Assembly Connection
RJ45-to-T57 Telco Adapter for GTR 8000 T57 DLN6821A Cable Assembly Connection (Non-Simulcast)
4W MLC 8000 (Analog Comparator) to Site Gateway (Conventional Channel Interface) Cable
CCGW Wiring Requirements for Receiving the Channel Active Indication from the MLC 8000 Analog Comparator
4-Wire MLC 8000 to MC2500 Analog Console Cable
Cable Requirements for a Console that Detects Audio Received from the Comparator through VOX Detection
Cable Requirements for a Console that Detects Audio from the Comparator through Channel Active Indication
CENTRACOM to MLC 8000 through CTI
4W MLC 8000 to Channel Bank 4W-E&M Voice Card Cable TRC Only (Circuit-Based Non-Simulcast Voting)
4W MLC 8000 to Channel Bank 4W-E&M Voice Card Cable for TRC Only (Circuit-Based Non-Simulcast Voting)
4W MLC 8000 to Channel Bank 4W-E&M Voice Card Cable Open End for External PTT (Circuit-Based Non-Simulcast Voting)
4W MLC 8000 to Channel Bank DSM-II Card Cable (Circuit-Based Simulcast)
4W MLC 8000 to Channel Bank DSM-II Card Cable (Circuit-Based Simulcast)
4W MLC 8000 to Channel Bank DSM-II Card Cable Open End (Circuit-Based Simulcast)
V.24 MLC 8000 to Channel Bank SRU Card Cable
V.24 MLC 8000 to MODEM with External Clock Connection Cable
V.24 MLC 8000 to GTR 8000
MLC 8000 Local O&M to RS232 (PC) DB9 Cable
Optimization/Calibration for Conventional Simulcast
Overview of Simulcast Optimization
Test Equipment
Setting up Test Equipment
Calibrating the DSA to Measure FM Deviation
Test Connections
Checking RF Signal Quality
Optimizing/Calibrating Conventional Analog Circuit-Based Simulcast
Calibrating and Optimizing Circuit-Based Simulcast
Coarse Level Adjustment (Transmit Audio Path) (Circuit Based)
Performing Coarse Level Adjustment (Transmit Audio Path 1 kHz)
Base Radio Deviation Settings GTR 8000
Coarse Level Adjustment (Conventional Systems PL/DPL Adjustment) (Circuit Based)
Performing Coarse Level Adjustment (Conventional Systems PL/ DPL Adjustment)
Fine Amplitude Adjustment (Circuit Based)
Performing Fine Amplitude Adjustment
Final Circuit Based System Level Check
Performing a Final System-Level Check
Recovered Level Entry Log
Optimizing/Calibrating Conventional Analog IP-Based Simulcast
Configuring the MLC 8000 for IP-Based Simulcast
Coarse Level Adjustment for Transmit Audio Path (IP Based)
Performing Coarse Level Adjustment (Transmit Audio Path 1 kHz)
Coarse Level Adjustment (Conventional Systems PL/DPL Adjustment) (IP Based)
Performing Coarse Level PL/DPL Adjustment (Conventional Systems)
Fine Amplitude Adjustment (IP Based)
Performing Fine Amplitude Adjustment
Final IP Based System Level Check
Performing a Final System-Level Check
Troubleshooting the Optimization/Calibration
Troubleshooting the Transmit (TX) Path for Simulcast Subsystems
Troubleshooting the Transmit (TX) Path for Non-Simulcast Subsystems
Troubleshooting General Transmit and Infrastructure for the GTR 8000
Troubleshooting Misaligned Reference Modulation Compensation (Final System-Level Check — IP Based Simulcast)
Audio Level Setting
Audio Levels for the MLC 8000 Link Converter for Analog or Mixed Mode
Audio Levels for the Site Gateway (Conventional Channel Interface) for Analog or Mixed Mode
Audio Levels for Base Radios for Analog or Mixed Mode
Reducing Delay for Analog Simulcast
Checking Audio Polarity
Your bookmarks will display here. Click the bookmark button to start creating them.
all words
highlight text in search results
Home
